2003-2004 Mechanical and Aerospace Engineering
UCLA
48-121 Engineering IV
Box 951597
Los Angeles, CA 90095-1597
(310) 825-2281
http://www.mae.ucla.edu
H. Thomas Hahn, Ph.D., Chair
Nasr M. Ghoniem, Ph.D. , Vice Chair
Tsu-Chin Tsao, Ph.D., Vice Chair
Albert Carnesale, Ph.D., Chancellor
H. Thomas Hahn, Ph.D. (Hughes Aircraft Company Professor of Manufacturing Engineering)
Chih-Ming Ho, Ph.D., Associate Vice Chancellor, Research (Ben Rich Lockheed Martin Professor of Aeronautics)
J. John Kim, Ph.D. (Rockwell International Professor of Engineering)
Russell R. O'Neill, Ph.D., Dean Emeritus
Chauncey Starr, Ph.D., Dean Emeritus
Alexander Samson, Ph.D., Emeritus
The Mechanical and Aerospace Engineering Department encompasses professional disciplines that are often divided into separate departments at other engineering schools. Curricula in aerospace engineering and mechanical engineering are offered on both the undergraduate and graduate levels. The Gourman Report ranked UCLA's mechanical engineering program tenth in the nation for undergraduate programs.
Because of the scope of the department, faculty research and teaching cover a wide range of technical disciplines. Research in thermal engineering emphasizes basic heat and mass transfer processes as well as thermal hydraulics. Topics in the area of design, dynamics, and control include robotics, mechanism design, control and guidance of aircraft and spacecraft, aeromechanics, and dynamics and control of large space structures. Studies in structural mechanics range from fracture mechanics and wave propagation, structural dynamics and aeroelasticity of helicopters and jet engine blades, computational transonic aeroelasticity to structural optimization and synthesis, and mechanics of composite structures. In the area of fluid mechanics and acoustics, investigations are under way on combustion, flow instabilities, turbulence and thermal convection, aeroacoustics, and unsteady aerodynamics of turbomachines, helicopter rotors, and fixed-wing aircraft. Other areas of research include applied plasma physics, surface modification by plasma, fusion reactor design, experimental tokamak confinement physics; light water reactor safety; reliability and risk assessment methodology; and nuclear materials. The department also has research activity in computer-aided design and manufacturing.
At the undergraduate level, the department offers accredited programs leading to B.S. degrees in Aerospace Engineering and in Mechanical Engineering. The former includes opportunity to emphasize propulsion, aerodynamics, design, dynamics and control, or structures and space technology, while the latter includes opportunity to emphasize design and manufacturing, dynamics and control, or fluids and thermal engineering.
At the graduate level, the department offers programs leading to M.S. and Ph.D. degrees in Mechanical Engineering and in Aerospace Engineering. An M.S. in Manufacturing Engineering is also offered.
The ABET-accredited aerospace engineering program is concerned with the design and construction of various types of fixed-wing and rotary-wing (helicopters) aircraft used for air transportation and national defense. It is also concerned with the design and construction of spacecraft, the exploration and utilization of space, and related technological fields.
Aerospace engineering is characterized by a very high level of technology. The aerospace engineer is likely to operate at the forefront of scientific discoveries, often stimulating these discoveries and providing the inspiration for the creation of new scientific concepts. Meeting these demands requires the imaginative use of many disciplines, including fluid mechanics and aerodynamics, structural mechanics, materials and aeroelasticity, dynamics, control and guidance, propulsion, and energy conversion.
Course requirements are as follows (191 minimum units required):
The ABET-accredited mechanical engineering program is designed to provide basic knowledge in thermodynamics, fluid mechanics, heat transfer, solid mechanics, mechanical design, dynamics, control, mechanical systems, manufacturing, and materials. The program includes fundamental subjects important to all mechanical engineers, with options in design and manufacturing, dynamics and control, and fluids and thermal engineering.
Course requirements are as follows (193 minimum units required):
For information on graduate admission, see Graduate Programs, page 24.
The following introductory information is based on the 2003-04 edition of Program Requirements for UCLA Graduate Degrees. Complete annual editions of Program Requirements are available from the "Publications" link at http://www.gdnet.ucla.edu. Students are subject to the degree requirements as published in Program Requirements for the year in which they matriculate.
The Department of Mechanical and Aerospace Engineering offers the Master of Science (M.S.) degree in Manufacturing Engineering, Master of Science (M.S.) and Doctor of Philosophy (Ph.D.) degrees in Aerospace Engineering, and Master of Science (M.S.) and Doctor of Philosophy (Ph.D.) degrees in Mechanical Engineering.
Students may select either the thesis plan or comprehensive examination plan. At least nine courses are required, of which at least five must be graduate courses. In the thesis plan, seven of the nine must be formal courses, including at least four from the 200 series. The remaining two may be 598 courses involving work on the thesis. In the comprehensive examination plan, no units of 500-series courses may be applied toward the minimum course requirement. The courses should be selected so that the breadth requirements and the requirements at the graduate level are met. The breadth requirements are only applicable to students who do not have a B.S. degree from an ABET-accredited aerospace or mechanical engineering program.
Undergraduate Courses. No lower division courses may be applied toward graduate degrees. In addition, the following upper division courses are not applicable toward graduate degrees: Chemical Engineering M105A, 199; Civil and Environmental Engineering 106A, 108, 199; Computer Science M152A, M152B, M171L, 199; Electrical Engineering 100, 101, 102, 103, 110L, M116D, M116L, M171L, 199; Materials Science and Engineering 110, 120, 130, 131, 131L, 132, 150, 160, 161L, 190, 191L, 199; Mechanical and Aerospace Engineering 102, 103, M105A, 105D, 199.
Breadth Requirements. Students are required to take at least three courses from the following four categories: (1) Mechanical and Aerospace Engineering 154A or 154B or 154S, (2) 150B or 150P, (3) 155 or 166A or 169A, (4) 161A or 171A.
Graduate-Level Requirement. Students are required to take at least one course from the following: Mechanical and Aerospace Engineering 250D, 253B, 254A, 255B, 256F, 263B, 269D, or 271B. The remaining courses can be taken to gain depth in
one or more of the several specialty areas covering the existing major fields in the department.
Breadth Requirements. Students are required to take at least three courses from the following four categories: (1) Mechanical and Aerospace Engineering 162A or 169A or 171A, (2) 150A or 150B, (3) 131A or 133A, (4) 156A or 156B.
Graduate-Level Requirement. Students are required to take at least one course from the following: Mechanical and Aerospace Engineering 231A, 231B, 231C, 250A, 255A, M256A, M256B, M269A, or 271A. The remaining courses can be taken to gain depth in one or more of the several specialty areas covering the existing major fields in the department.
Comprehensive Examination Plan
The comprehensive examination, which is offered every quarter, must be in written form. The comprehensive examining committee may conduct an oral examination after review of the written examination. Students may, in consultation with the adviser and the major field chair, elect to take the first part of the Ph.D. written qualifying examination (formerly referred to as the preliminary examination) as the comprehensive examination. In case of failure, students may be reexamined once with the consent of the graduate adviser.
The thesis must describe some original piece of research that has been done under the supervision of the thesis committee. Students should normally start to plan the thesis at least one year before the award of the M.S. degree is expected. There is no examination under the thesis plan.
Students may select either the thesis plan or comprehensive examination plan. At least nine courses are required, of which at least five must be graduate courses. In the thesis plan, seven of the nine must be formal courses, including at least four from the 200 series. The remaining two may be 598 courses involving work on the thesis. In the comprehensive examination plan, no units of 500-series courses may be applied toward the minimum course requirement. Choices may be made from the following major areas:
Undergraduate Courses. No lower division courses may be applied toward graduate degrees. In addition, the following upper division courses are not applicable toward graduate degrees: Chemical Engineering M105A, 199; Civil and Environmental Engineering 106A, 108, 199; Computer Science M152A, M152B, M171L, 199; Electrical Engineering 100, 101, 102, 103, 110L, M116D, M116L, M171L, 199; Materials Science and Engineering 110, 120, 130, 131, 131L, 132, 150, 160, 161L, 190, 191L, 199; Mechanical and Aerospace Engineering 102, 103, M105A, 105D, 199.
Upper Division Courses . Students are required to take at least three courses from the following: Mechanical and Aerospace Engineering 163A, 168, 174, 193, 194, 195.
Graduate Courses. Students are required to take at least three courses from the following: Mechanical and Aerospace Engineering 263A, 263C, 263D, M280, 293, 294, 295, 296A, 296B, 297.
Additional Courses. The remaining courses may be taken from other major fields of study in the department or from the following: Architecture and Urban Design M226B, M227B, 227D; Computer Science 241A, 241B; Management 240A, 240B, 240C, 240D, 241A, 241B, 242A, 242B, 243A, 243B, 243C; Mathematics 120A, 120B.
Comprehensive Examination Plan
The comprehensive examination, which is offered every quarter, must be in written form. The comprehensive examining committee may conduct an oral examination after review of the written examination. In case of failure, students may be reexamined once with the consent of the graduate adviser.
The thesis must describe some original piece of research that has been done under the supervision of the thesis committee. Students would normally start to plan the thesis at least one year before the award of the M.S. degree is expected. There is no examination under the thesis plan.
Major Fields or Subdisciplines
Dynamics; fluid mechanics; heat and mass transfer; manufacturing and design (mechanical engineering only); nanoelectromechanical/microelectromechanical systems (NEMS/MEMS); structural and solid mechanics; systems and control.
Ph.D. students may propose ad hoc major fields, which must differ substantially from established major fields and satisfy one of the following two conditions: (1) the field is interdisciplinary in nature and (2) the field represents an important research area for which there is no established major field in the department (condition 2 most often applies to recently evolving research areas or to areas for which there are too few faculty to maintain an established major field).
Students in an ad hoc major field must be sponsored by at least three faculty members, at least two of whom must be from the department.
The basic program of study for the Ph.D. degree is built around major and minor fields. The established major fields are listed above, and a detailed syllabus describing each Ph.D. major field can be obtained from the Student Affairs Office.
The program of study for the Ph.D. requires students to perform original research leading to a doctoral dissertation and to master a body of knowledge that encompasses material from their major field and breadth material from outside the major field. The body of knowledge should include (1) six major field courses, at least four of which must be graduate courses, (2) one minor field, (3) any three additional courses, at least two of which must be graduate courses, that enhance the study of the major or minor field.
The major field syllabus advises students as to which courses contain the required knowledge, and students usually prepare for the written qualifying examination (formerly referred to as the preliminary examination) by taking these courses. However, students can acquire such knowledge by taking similar courses at other universities or even by self-study.
The minor field embraces a body of knowledge equivalent to three courses, at least two of which must be graduate courses. Minor fields are often subsets of major fields, and minor field requirements are then described in the syllabus of the appropriate major field. Established minor fields with no corresponding major field can also be used, such as applied mathematics and applied plasma physics and fusion engineering. Also, an ad hoc field can be used in exceptional circumstances, such as when certain knowledge is desirable for a program of study that is not available in established minor fields.
Grades of B- or better, with a grade-point average of at least 3.33 in all courses included in the minor field, and the three additional courses mentioned above are required. If students fail to satisfy the minor field requirements through coursework, a minor field examination may be taken (once only).
Written and Oral Qualifying Examinations
After mastering the body of knowledge defined in the major field, students take a written qualifying (preliminary) examination covering this knowledge. Students must have been formally admitted to the Ph.D. program or admitted subject to completion of the M.S. degree by the end of the quarter following the quarter in which the examination is given. The examination must be taken within the first two calendar years from the time of admission to the Ph.D. program. Students must be registered during the quarter in which the examination is given and be in good academic standing (minimum GPA of 3.25). The student's major field proposal must be completed prior to taking the examination. Students may not take an examination more than twice. Students in an ad hoc major field must pass a written qualifying examination that is approximately equivalent in scope, length, and level to the written qualifying examination for an established major field.
After passing the written qualifying examination, students take the University Oral Qualifying Examination within four calendar years from the time of admission to the Ph.D. program. The nature and content of the examination are at the discretion of the doctoral committee but include a review of the dissertation prospectus and may include a broad inquiry into the student's preparation for research.
Note: Doctoral Committees. A doctoral committee consists of a minimum of four members. Three members, including the chair, are "inside" members and must hold appointments at UCLA in the student's major department in HSSEAS. The "outside" member must be a UCLA faculty member outside the student's major department.
Features of the dynamics field include dynamics and control of physical systems, including spacecraft, aircraft, helicopters, industrial manipulators; analytical studies of control of large space structures, aeromechanical stability of helicopters, active control of helicopter vibrations, experimental studies of electromechanical systems, and robotics.
The fluid mechanics field includes theoretical, numerical, and experimental studies related to topics in fluid mechanics such as fluid instabilities, flow transition, numerical simulation of turbulence, flow control, computational aerodynamics, hypersonic flow, aerodynamic noise production, high-speed combustion, acoustically driven combusting flows, laser diagnostics, microgravity studies of interfacial phenomena and combustion, thermocapillary convection, and microscale/nanoscale fluid mechanics and combustion.
The heat and mass transfer field includes studies of convection, radiation, conduction, evaporation, condensation, boiling, two-phase flow, instability and turbulent flow, microscale and nanoscale heat transfer and direct energy conversion, and reactive flows in porous media.
The manufacturing and design field is developed around an integrated approach to manufacturing and mechanical product design. It includes research on material behavior (physical and mechanical) in manufacturing processes and in design; design of mechanical systems (e.g., power, microelectromechanical systems, and transportation); design methodology; automation, robotics, and unmanned machinery; manufacturing and mechanical systems (reliability, safety, and optimization); CAD/CAM theory and applications; computational geometry and geometrical modeling.
Nanoelectromechanical/Microelectromechanical Systems
The nanoelectromechanical/microelectromechanical systems (NEMS/MEMS) field focuses on science and engineering issues ranging in size from nanometers to millimeters and includes both experimental and theoretical studies covering fundamentals to applications. The study topics include microscience, top-down and bottom-up nano/micro fabrication technologies, molecular fluidic phenomena, nanoscale/microscale material processing, biomolecular signatures, heat transfer at the nanoscale, and system integration. The program is highly interdisciplinary in nature.
Structural and Solid Mechanics
The solid mechanics field features theoretical, numerical, and experimental studies, including fracture mechanics and damage tolerance, micromechanics with emphasis on technical applications, wave propagation and nondestructive evaluation, mechanics of composite materials, mechanics of thin films and interfaces, and investigation into coupled electro-magneto-thermomechanical material systems. The structural mechanics field includes structural dynamics with applications to aircraft and spacecraft, fixed-wing and rotary-wing aeroelasticity, fluid structure interaction, computational transonic aeroelasticity, structural optimization, finite element methods and related computational techniques, mechanics of composite structures, and analysis of adaptive structures.
The systems and control field deals with modeling, analysis, and control of dynamical systems. Applied mathematics is used to develop methods for stability analysis, design of optimal and robust control systems, filtering, and system identification. Courses and research programs include theoretical analysis of the performance of systems and algorithms; computational methods for simulation, optimization, control, filtering, and identification; and experimental studies involving system identification and hardware implementation of real-time control and filtering. The field covers a broad spectrum of applications areas, primarily emphasizing problems in mechanical and aerospace engineering.
The ad hoc major fields program has sufficient flexibility that students can form academic major fields in their area of interest if the proposals are supported by several faculty members. Previous fields of study included acoustics, system risk and reliability, and engineering thermodynamics. Nuclear science and engineering, a former active major field, is available on an ad hoc basis only.
The Mechanical and Aerospace Engineering Department has a number of experimental facilities at which both fundamental and applied research is being conducted. More information is at http://www.mae.ucla.edu.
Mohamed A. Abdou, Ph.D. (Wisconsin, 1973)
Fusion, nuclear, and mechanical engineering design, testing, and system analysis, thermomechanics; thermal hydraulics; neutronics, plasma-material interactions; blankets and high heat flux components; experiments, modeling and analysis
Oddvar O. Bendiksen, Ph.D. (UCLA, 1980)
Classical and computational aeroelasticity, structural dynamics and unsteady aerodynamics
Gregory P. Carman, Ph.D. (Virginia Tech, 1991)
Electromagnetoelasticity models, fatigue characterization of piezoelectric ceramics, magnetostrictive composites, characterizing shape memory alloys, fiber-optic sensors, design of damage detection systems, micromechanical analysis of composite materials, experimentally evaluating damage in composites
Albert Carnesale, Ph.D. (North Carolina State, 1966)
Issues associated with nuclear weapons and other weapons of mass destruction, energy policy, American foreign policy
Ivan Catton, Ph.D. (UCLA, 1966)
Heat transfer and fluid mechanics, transport phenomena in porous media, nucleonics heat transfer and thermal hydraulics, natural and forced convection, thermal/hydrodynamic stability, turbulence
Yong Chen, Ph.D. (UC Berkeley, 1996)
Nanoscale science and engineering, micro- and nano-fabrication, self-assembly phenomena, micro- and nano-scale electronic, mechanical, optical, biological, and sensing devices, circuits and systems
Vijay K. Dhir, Ph.D. (Kentucky, 1972)
Two-phase heat transfer, boiling and condensation, thermal hydraulics of nuclear reactors, microgravity heat transfer, soil remediation, high-power density electronic cooling
Rajit Gadh, Ph.D. (Carnegie Mellon, 1991)
Mobile Internet, web-based product design, wireless and collaborative engineering, CAD/visualization
Nasr M. Ghoniem, Ph.D. (Wisconsin, 1977)
Mechanical behavior of high-temperature materials, radiation interaction with material (e.g., laser, ions, plasma, electrons, and neutrons), material processing by plasma and beam sources, physics and mechanics of material defects, fusion energy
James S. Gibson, Ph.D. (U. Texas, Austin, 1975)
Control and identification of dynamical systems; optimal and adaptive control of distributed systems, including flexible structures and fluid flows; adaptive filtering, identification, and noise cancellation
Vijay Gupta, Ph.D. (MIT, 1989)
Experimental mechanics, fracture of engineering solids, mechanics of thin film and interfaces, failure mechanisms and characterization of composite materials, ice mechanics
H. Thomas Hahn, Ph.D. (Pennsylvania State, 1971)
Nanocomposites, multifunctional composites, nanomechanics, rapid prototyping, information systems
Chih-Ming Ho, Ph.D. (Johns Hopkins, 1974)
Molecular fluidic phenomena, nanoelectro-mechanical/microelectromechanical systems, direct handling of macromolecules, bionano technologies, DNA-based micro sensors
Ann R. Karagozian, Ph.D. (Cal Tech, 1982)
Fluid mechanics of combustion systems with emphasis on acoustically controlled reacting flows detonation phenomena, high-speed combustion systems, and microgravity combustion
Chang-Jin (C-J) Kim, Ph.D. (UC Berkeley, 1991)
Microelectromechanical systems, micromachining technologies, microstructures, sensors and actuators, microdevices and systems, micromanufacturing, microscale mechanics
J. John Kim, Ph.D. (Stanford, 1978)
Turbulence and computational fluid dynamics, numerical simulation of turbulent and transitional flows, turbulence and heat transfer control, control of transition to turbulence, numerical methods for direct and large-eddy simulations
Adrienne G. Lavine, Ph.D. (UC Berkeley, 1984)
Heat transfer: thermomechanical behavior of shape memory alloys, thermal aspects of manufacturing processes, natural and mixed convection
Kuo-Nan Liou, Ph.D. (New York U., 1970)
Radiative transfer and satellite remote sensing with application to clouds and aerosols in the earth's atmosphere
Ajit K. Mal, Ph.D. (Calcutta U., 1964)
Mechanics of solids, fractures and failure, wave propagation, nondestructive evaluation, composite materials
Anthony F. Mills, Ph.D. (UC Berkeley, 1965)
Convective heat and mass transfer, condensation heat transfer, turbulent flows, ablation and transpiration cooling, perforated plate heat exchangers
Carlo D. Montemagno, Ph.D. (Notre Dame, 1995)
Nanoscale biomedical systems, microrobotics, directed self-assembly, hybrid living/nonliving device engineering, pathogen detection and tissue engineering
Jeff S. Shamma, Ph.D. (MIT, 1988)
Feedback control theory and design with application to mechanical, aerospace, and manufacturing systems
Owen I. Smith, Ph.D. (UC Berkeley, 1977)
Combustion and combustion-generated air pollutants, hydrodynamics and chemical kinetics of combustion systems, semiconductor chemical vapor deposition
Jason Speyer, Ph.D. (Harvard, 1968)
Stochastic and deterministic optimal control and estimation with application to aerospace systems; guidance, flight control, and flight mechanics
Tsu-Chin Tsao, Ph.D. (UC Berkeley, 1988)
Modeling and control of dynamic systems with applications in mechanical systems, manufacturing processes, automotive systems, and energy systems, digital control, repetitive and learning control, adaptive and optimal control, mechatronics
Daniel C.H. Yang, Ph.D. (Rutgers, 1982)
Robotics and mechanisms; CAD/CAM systems, computer-controlled machines
Xiaolin Zhong, Ph.D. (Stanford, 1991)
Computational fluid dynamics, hypersonic flow, rarefied gas dynamics, numerical simulation of transient hypersonic flow with nonequilibrium real gas effects, instability of hypersonic boundary layers
Harry Buchberg, M.S. (UCLA, 1954)
Heat transfer processes in energy conversion, conservation and environmental control with emphasis on solar energy use and indoor "climate"
Andrew F. Charwat, Ph.D. (UC Berkeley, 1952)
Experimental fluid mechanics, two-phase flow, ocean thermal energy conversion
Peretz P. Friedmann, Sc.D. (MIT, 1972)
Aeroelasticity of helicopters and fixed-wing aircraft, structural dynamics of rotating systems, rotor dynamics, unsteady aerodynamics, active control of structural dynamics, structural optimization with aeroelastic constraints
Walter C. Hurty, M.S. (UCLA, 1948)
Dynamics of structures, including large structural systems, design and analysis of aerospace structures, stability of motion in self-excited systems
Robert E. Kelly, Sc.D. (MIT, 1964)
Thermal convection, thermocapillary convection, stability of shear flows, stratified and rotating flows, interfacial phenomena, microgravity fluid dynamics
Cornelius T. Leondes, Ph.D. (Pennsylvania, 1954)
Applied dynamic systems control
Michel A. Melkanoff, Ph.D. (UCLA, 1955)
Programming languages, data structures, database design, relational models, simulation systems, robotics, computer-aided design and manufacturing, numerical-controlled machinery
D. Lewis Mingori, Ph.D. (Stanford, 1966)
Dynamics and control, stability theory, nonlinear methods, applications to space and ground vehicles
Peter A. Monkewitz, Ph.D. (E.T.H., Federal Institute of Technology, Zurich, 1977)
Fluid mechanics, internal acoustics and noise produced by turbulent jets
Philip F. O'Brien, M.S. (UCLA, 1949)
Industrial engineering, environmental design, thermal and luminous engineering systems
David Okrent, Ph.D. (Harvard, 1951)
Fast reactors, reactor physics, nuclear reactor safety, nuclear fuel element behavior, risk-benefit studies, nuclear environmental safety, fusion reactor technology
Russell R. O'Neill, Ph.D. (UCLA, 1956)
Systems engineering, maritime transportation systems
Lucien A. Schmit, Jr., M.S. (MIT, 1950)
Structural mechanics, optimization, automated design methods for structural systems and components, application of finite element analysis techniques and mathematical programming algorithms in structural design, analysis and synthesis methods for fiber composite structural components
Chauncey Starr, Ph.D. (Rensselaer Polytechnic Institute, 1935)
Risk-benefit analysis of technical systems, national energy policy
Richard Stern, Ph.D. (UCLA, 1964)
Experimentation in noise control, physical acoustics, engineering acoustics, medical acoustics
William T. Thomson, Ph.D. (UC Berkeley, 1938)
Resonant nonlinear control circuits
Russell A. Westmann, Ph.D. (UC Berkeley, 1962)
Mechanics of solid bodies, fracture mechanics, adhesive mechanics, composite materials, theoretical soil mechanics, mixed boundary value problems
Robert T. M'Closkey, Ph.D. (Cal Tech, 1995)
Nonlinear control theory and design with application to mechanical and aerospace systems, real-time implementation
Xiang Zhang, Ph.D. (UC Berkeley, 1996)
Nano-micro fabrication and MEMS, laser microtechnology, nano-micro devices (electronic, mechanical, photonic, and biomedical), rapid prototyping and microstereo lithography, design and manufacturing in nano-microscale, semiconductor manufacturing, physics and chemistry in nano-micro devices and fabrication.
Jeff D. Eldredge, Ph.D. (Cal Tech, 2002)
Aeroacoustics, particle-based numerical methods for fluids, control of acoustically-driven instabilities, vorticity dynamics
Yongho Sungtaek Ju, Ph.D. (Stanford, 1999)
Heat transfer, thermodynamics, micro- and nano-electromechanical systems (MEMS/NEMS), magnetism, nano-bio technology
H. Pirouz Kavehpour, Ph.D. (MIT, 2003)
Microscale fluid mechanics, transport phenomena in biological systems, physics of contact line phenomena, complex fluids, non-isothermal flows, mcrio- and nano-heat guides, micro-tribology
William S. Klug, Ph.D. (Cal Tech, 2003)
Computational structural and solid mechanics, finite element methods, computational biomechanics, nanomechanics of biological systems
Laurent Pilon, Ph.D. (Purdue, 2002)
Interfacial and transport phenomena, radiation transfer, materials synthesis, multi-phase flow, heterogeneous media
Alexander Samson, Ph.D. (U. New South Wales, 1968), Emeritus
Electromechanical system design, mechanical design, design of mechanical energy systems
Ravnesh Amar, Ph.D. (UCLA, 1974)
Heat transfer and thermal science
C.H. Chang, M.S. (UCLA, 1985), Emeritus
Computer-aided manufacturing and numerical control
Rudolf X. Meyer, Dr.Engr. (Johns Hopkins, 1955)
Leslie M. Lackman, Ph.D. (UC Berkeley, 1967)
Structural analysis and design, composite structures